FIDO2-CRED(1)

NAME
fido2-cred - make/verify a FIDO2 credential

SYNOPSIS
fido2-cred -M [-bdhqruvw] [-a mode] [-c cred_protect] [-i input_file] [-o output_file] device [type]
fido2-cred -V [-dhv] [-c cred_protect] [-i input_file] [-o output_file] [type]

DESCRIPTION
fido2-cred makes or verifies a FIDO2 credential.

A credential type may be es256 (denoting ECDSA over NIST P-256 with SHA-256), es384 (denoting ECDSA over NIST P-384 with SHA-384), rs256 (denoting 2048-bit RSA with PKCS#1.5 padding and SHA-256), or eddsa (denoting EDDSA over Curve25519 with SHA-512). If type is not specified, es256 is assumed.

When making a credential, the authenticator may require the user to authenticate with a PIN. If the -q option is not specified, fido2-cred will prompt the user for the PIN. If a tty is available, fido2-cred will use it to obtain the PIN. Otherwise, stdin is used.

The input of fido2-cred is defined by the parameters of the credential to be made/verified. See the INPUT FORMAT section for details.

The output of fido2-cred is defined by the result of the selected operation. See the OUTPUT FORMAT section for details.

If a credential is successfully created or verified, fido2-cred exits 0. Otherwise, fido2-cred exits 1.

The options are as follows:

-M  Tells fido2-cred to make a new credential on device.

-V  Tells fido2-cred to verify a credential.

-b  Request the credential's “largeBlobKey”, a 32-byte symmetric key associated with the generated credential.

-a mode
    When making a credential, request enterprise attestation. Please refer to <fido/param.h> for the set of possible values.

-c cred_protect
    If making a credential, set the credential's protection level to cred_protect, where cred_protect is the credential's protection level in decimal notation. Please refer to <fido/param.h> for the set of possible values. If verifying a credential, check whether the credential's protection level was signed by the authenticator as cred_protect.

-d  Causes fido2-cred to emit debugging output on stderr.

-h  If making a credential, enable the FIDO2 hmac-secret extension. If verifying a credential, check whether the extension data bit was signed by the authenticator.

-i input_file
    Tells fido2-cred to read the parameters of the credential from input_file instead of stdin.

-o output_file
    Tells fido2-cred to write output on output_file instead of stdout.

-q  Tells fido2-cred to be quiet. If a PIN is required and -q is specified, fido2-cred will fail.

-r  Create a resident credential. Resident credentials are called “discoverable credentials” in CTAP 2.1.

-u  Create a U2F credential. By default, fido2-cred will use FIDO2 if supported by the authenticator, and fallback to U2F otherwise.

-v  If making a credential, request user verification. If verifying a credential, check whether the user verification bit was signed by the authenticator.

-w  Tells fido2-cred that the first line of input when making a credential shall be interpreted as unhashed client data. This is required by Windows Hello, which calculates the client data hash internally.

INPUT FORMAT
The input of fido2-cred consists of base64 blobs and UTF-8 strings separated by newline characters ('\n').

When making a credential, fido2-cred expects its input to consist of:

1.  client data hash (base64 blob);
2.  relying party id (UTF-8 string);
3.  user name (UTF-8 string);
4.  user id (base64 blob).

When verifying a credential, fido2-cred expects its input to consist of:

1.  client data hash (base64 blob);
2.  relying party id (UTF-8 string);
3.  credential format (UTF-8 string);
4.  CBOR encoded authenticator data (base64 blob);
5.  credential id (base64 blob);
6.  attestation signature (base64 blob);
7.  attestation certificate (optional, base64 blob).

UTF-8 strings passed to fido2-cred must not contain embedded newline or NUL characters.

OUTPUT FORMAT
The output of fido2-cred consists of base64 blobs, UTF-8 strings, and PEM-encoded public keys separated by newline characters ('\n').

Upon the successful generation of a credential, fido2-cred outputs:

1.  client data hash (base64 blob);
2.  relying party id (UTF-8 string);
3.  credential format (UTF-8 string);
4.  CBOR encoded authenticator data (base64 blob);
5.  credential id (base64 blob);
6.  attestation signature (base64 blob);
7.  attestation certificate, if present (base64 blob).
8.  the credential's associated 32-byte symmetric key (“largeBlobKey”), if present (base64 blob).

Upon the successful verification of a credential, fido2-cred outputs:

1.  credential id (base64 blob);
2.  PEM-encoded credential key.

EXAMPLES
Create a new es256 credential on /dev/hidraw5, verify it, and save the id and the public key of the credential in cred:

    $ echo credential challenge | openssl sha256 -binary | base64 > cred_param
    $ echo relying party >> cred_param
    $ echo user name >> cred_param
    $ dd if=/dev/urandom bs=1 count=32 | base64 >> cred_param
    $ fido2-cred -M -i cred_param /dev/hidraw5 | fido2-cred -V -o cred

SEE ALSO
fido2-assert(1), fido2-token(1)

CAVEATS
Please note that fido2-cred handles Basic Attestation and Self Attestation transparently. In the case of Basic Attestation, the validity of the authenticator's attestation certificate is not verified.